The use of speed bumps is widespread
across the globe. Recognized as traffic claiming device, a speed bump
is used as a vertical deflection so as to slow down speed of motor
vehicles and avert accidents. There are many speed bumps which are
made on a temporary basis near schools, colleges, office buildings
and generally near very congested area, in order to avoid any
mishaps, so that the drivers are forced to drive slowly. Temporary
bumps are removed after a certain time, and they can be made of
plastic, concrete, and even of simple stone slabs or bricks. They are
so powerful that they motivate even tractors and trailers to reduce
their speed and adhere to the traffic rules and safety principles.
What is the specific Composition
of the road bumps?
of the road bumps?
A variety of durable and useful
materials are used for construction of bumps. These include concrete,
asphalt, metal, plastic, vulcanized rubber and so on. However,
concrete and asphalt are the two most common materials used for
designing bumps owing to their precise permanence and effectiveness
in minimizing traffic speed. Rubber is another useful product for
creating bumps. This is because it can be pre-shaped into any
standard size built in consistence with industrial standards. The
pre-fabricated road cushions or bumps made out of rubber are
assembled together and then bolted down on the road as standard
specifications. However, you should know this that rubber bumps are
used for experiments to test the fact if they are proper for streets
and only then an actual street bump made out of asphalt or concrete
is installed.
materials are used for construction of bumps. These include concrete,
asphalt, metal, plastic, vulcanized rubber and so on. However,
concrete and asphalt are the two most common materials used for
designing bumps owing to their precise permanence and effectiveness
in minimizing traffic speed. Rubber is another useful product for
creating bumps. This is because it can be pre-shaped into any
standard size built in consistence with industrial standards. The
pre-fabricated road cushions or bumps made out of rubber are
assembled together and then bolted down on the road as standard
specifications. However, you should know this that rubber bumps are
used for experiments to test the fact if they are proper for streets
and only then an actual street bump made out of asphalt or concrete
is installed.
The Advantages of road bumps
-
In
most countries, speed of vehicles is statutorily mandated at a low
reading, which is usually 40 km/hour, i.e., 25 mph and is 8 to 16
km/hour in car parks, i.e., 5 to 9.9 mph. Speed humps help to
maintain the speed level.
-
Speed
bumps are highly effective on roads
in claiming traffic so as to check speed limits so as to ward off
accidents. Survey shows that traffic volumes, speed, accidents are
becoming significantly less across the globe.
-
Road
bumps tend to slow down emergency vehicles and speed cushions can
readily address this particular problem by letting large-sized
vehicles to straddle across to slow down speed. Also, this proves as
a great advantage for buses since lower floor vehicles tend to
sometimes ground off traditional humps.
-
Less
traffic and slower drivers help to shrink down accident rates.
They
allow vehicles to take alternative routes and also help in creating
smart walkways
-
Since
the bumps deter non-mandatory vehicles to pick alternative routes on
residential streets, this helps to reduce maximum noise pollution.
-
Placing
street humps/bumps strategically on roads helps to create convenient
walkways so that pedestrians can use the same to cross roads.
-
The
bumps are customized in varied sizes, shapes and materials. These
factors lend a great customizable appeal and the best part is their
sizes can be changed accordingly to influence of speed of drivers.
Yet again, the humps can be designed in different widths and
heights, the combination of which will eventually determine whether
the speed of vehicles is controlled abruptly or slowly. Hence, all
these are mostly required when there is need for handling of speed
at any particular site.
Now
there are many companies who choose PVC speed bumps and not those
that are made of Tarmac. Tarmac bumps require more time to get
installed, their operational cost is also very high and they do not
offer that much durability as that offered by the PVC alternatives.
They are also susceptible to heat, UV rays of the sun and even frost
and rain, so the PVC bumps have become an important alternative to
stop road hazards and collisions.
there are many companies who choose PVC speed bumps and not those
that are made of Tarmac. Tarmac bumps require more time to get
installed, their operational cost is also very high and they do not
offer that much durability as that offered by the PVC alternatives.
They are also susceptible to heat, UV rays of the sun and even frost
and rain, so the PVC bumps have become an important alternative to
stop road hazards and collisions.
Whether speed humps or bumps, the
tools should be considered seriously for maximum protection of you
and everybody and everything else on roads. So please see
more details
about speed bumps here.
tools should be considered seriously for maximum protection of you
and everybody and everything else on roads. So please see
more details
about speed bumps here.
